12 Select Point to Point Tunneling Protocol (PPTP) as the Type of VPN. Select Maximum
strength encryption (disconnect if server declines) and the Allow these protocols radio
button. Select Microsoft CHAP Version 2 (MS-CHAP v2) and clear all of the other check boxes.
Do not click OK yet.
13 In the Connect window, enter the username and password of your Device's account. Click
Connect.
Note: The user account must have been configured in the Maintenance > User
Account screen. Refer to
14 A window appears while the username and password are verified. The connection is then
established.
SBG3500-N000 User's Guide
Chapter 29 on page
300.
Chapter 4 Tutorials
75