ZyXEL Communications SBG3500-N000 User Manual page 353

Double-click on the profile of the network card you wish to configure. The Ethernet Device
2
General screen displays as shown.
Figure 189 Red Hat 9.0: KDE: Ethernet Device: General
• If you have a dynamic IP address, click Automatically obtain IP address settings with and
select dhcp from the drop-down list.
• If you have a static IP address, click Statically set IP Addresses and fill in the Address,
Subnet mask, and Default Gateway Address fields.
Click OK to save the changes and close the Ethernet Device General screen.
3
If you know your DNS server IP address(es), click the DNS tab in the Network Configuration
4
screen. Enter the DNS server information in the fields provided.
Figure 190 Red Hat 9.0: KDE: Network Configuration: DNS
Click the Devices tab.
5
SBG3500-N000 User's Guide
Appendix A Setting up Your Computer's IP Address
353