Create Certificate Request - ZyXEL Communications SBG3500-N000 User Manual

Chapter 19 Certificates

19.3.1 Create Certificate Request

Click Security > Certificates > Local Certificates and then Create Certificate Request to
open the following screen. Use this screen to have the Device generate a certification request.
Figure 110 Create Certificate Request
The following table describes the labels in this screen.
Table 84 Create Certificate Request
LABEL
Certificate
Name
Common Name
Organization
Name
State/Province
Name
Country/Region
Name
Apply
Cancel
After you click Apply, the following screen displays to notify you that you need to get the certificate
request signed by a Certificate Authority. If you already have, click Load_Signed to import the
signed certificate into the Device. Otherwise click Back to return to the Local Certificates screen.
252
DESCRIPTION
Type up to 63 ASCII characters (not including spaces) to identify this certificate.
Select Auto to have the Device configure this field automatically. Or select Customize to
enter it manually.
Type the IP address (in dotted decimal notation), domain name or e-mail address in the field
provided. The domain name or e-mail address can be up to 63 ASCII characters. The
domain name or e-mail address is for identification purposes only and can be any string.
Type up to 63 characters to identify the company or group to which the certificate owner
belongs. You may use any character, including spaces, but the Device drops trailing spaces.
Type up to 32 characters to identify the state or province where the certificate owner is
located. You may use any character, including spaces, but the Device drops trailing spaces.
Select a country to identify the nation where the certificate owner is located.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
SBG3500-N000 User's Guide