The Wmm Screen - ZyXEL Communications SBG3500-N000 User Manual

Table 27 Network Setting > Wireless > WPS (continued)
LABEL
Connect
Method 2
Register
Method 3
Release
Configuratio
n
Generate
New PIN
Number
Apply
Cancel

7.6 The WMM Screen

Use this screen to enable Wi-Fi MultiMedia (WMM) and WMM Power Save in wireless networks for
multimedia applications.
Click Network Setting > Wireless > WMM. The following screen displays.
Figure 43 Network Setting > Wireless > WMM
SBG3500-N000 User's Guide
DESCRIPTION
Click this button to add another WPS-enabled wireless device (within wireless range of the
Device) to your wireless network. This button may either be a physical button on the
outside of device, or a menu button similar to the Connect button on this screen.
Note: You must press the other wireless device's WPS button within two minutes of pressing
this button.
Use this section to set up a WPS wireless network by entering the PIN of the client into the
Device.
Enter the PIN of the device that you are setting up a WPS connection with and click
Register to authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the device's
settings.
Note: You must also activate WPS on that device within two minutes to have it present its PIN
to the Device.
Use this section to set up a WPS wireless network by entering the PIN of the Device into the
client.
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the Device.
The PIN (Personal Identification Number) of the Device is shown here. Enter this PIN in the
configuration utility of the device you want to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN Number button to have the Device create a new PIN.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Chapter 7 Wireless
145