Add/Edit Internet Connection - ZyXEL Communications SBG3500-N000 User Manual

Chapter 6 Broadband

6.2.1 Add/Edit Internet Connection

Click Add new WAN Interface in the Broadband screen or the Edit icon next to an existing WAN
interface to configure a WAN connection. The screen varies depending on the interface type, mode,
encapsulation, and IPv6/IPv4 mode you select.
6.2.1.1 Routing Mode
Use Routing mode if your ISP give you one IP address only and you want multiple computers to
share an Internet account.
The following example screen displays when you select the ADSL over ATM connection type,
Routing mode, and PPPoE encapsulation. The screen varies when you select other interface type,
encapsulation, and IPv6/IPv4 mode.
Figure 23 Routing Mode
The following table describes the labels in this screen.
Table 8 Routing Mode
LABEL
General
Active
Name
108
DESCRIPTION
Select this to activate the WAN configuration settings.
Specify a descriptive name for this connection.
SBG3500-N000 User's Guide