•
Power source (PoE, 12VDC or 24VAC)
•
A computer – for configuring NetCam SC and for viewing video
Note: A computer is not necessary to operate NetCam, only to configure it.
•
Network connectivity (LAN, cable modem, DSL, T-1, Dial-Up
Internet Account, Satellite Modem, etc.)
1.3
Parts of NetCam SC
NET (PoE) 802.3af
100Mbit Power over Ethernet Port
Page 8
VIDEO OUT
24VAC
Analog Video
Useful for legacy CCTV
(NTSC or PAL)
Power Infrastructure
NetCam SC Vandal Resistant Dome
PWR (DC Power Jack)
10-20VDC