Table of Contents
Advertisement
Mode
This determines which method is used to watch the live video:
Javascript - the default viewing mode, works on nearly all
browsers, including iPhone. For higher speeds, use Java or
ActiveX
Pull - Java applet "pulls" the live images via web port (usually80)
Push - Java applet receives motion JPEG stream via port 8001
ActiveX - receives motion JPEG stream via port 8001
.NET - receives motion JPEG stream via web port (usually 80)
3.2
NetCam SC's Configuration Menus
Virtually any web browser can be used to access NetCam SC's
configuration menus. To access these menus, type NetCam SC's IP address
in your browser's address bar (example: http://192.168.1.5).
This will bring up the live image page. Click on the Config link. You will
be prompted for a User Name and Password. Use admin for both.
Tip:
We highly recommend that you change the default password. To do so,
see the section on Security Properties in this chapter.
NetCam SC Vandal Resistant Dome
Page 23
Advertisement
Table of Contents
