Table of Contents
Advertisement
Network
Hostname
Alphanumeric name of the camera that can get linked to its IP
address. This is disabled if DHCP is enabled.
Default: netcamsc
Gateway
In most cases, this is a machine name or IP address that serves as
a gateway to the Internet. If the camera is on a private network behind
a router/gateway, you would enter the IP address of the router/gateway.
This is disabled if DHCP is enabled.
Domain Name Servers (DNS)
Domain name server IP address. This is critical if your FTP server
and/or time server is entered as a domain name and not an IP address.
Check with your ISP to determine your name servers (you can list up
to three). This is disabled if DHCP is enabled.
Web Server Port
The default web server port is 80. A situation that calls for chang-
ing the port number is if you're hosting one or more cameras behind a
router that supports port forwarding. This allows you to access multiple
cameras behind a single public IP address.
Example: Assign the camera a web server port of 8085. In your router, under the
Use caution when changing the web server port number. If it's anything
but 80, you will need to add <:port number> to the end of the IP address
when browsing (example: http://192.168.1.5:8085).
Default: 80
Page 48
port forwarding section, route port 8085 to the camera's IP address.
NetCam SC Vandal Resistant Dome
Advertisement
Table of Contents
