Table of Contents
Advertisement
Delay
The number of milliseconds to delay between image captures.
For the fastest possible frame rate, set this to 33. Here are some
example frames rates for a single triggered video source:
33 ms = 30 frames per second (Max Speed)
250 ms = 4 fps
1000 ms = 1 fps
Count
The number of pre-buffer images to store. There is a finite
amount of memory in which to store images. Keep the total number
of pre and post-buffer medium resolution images to below 50, even
less for full size images.
POST-BUFFER
Post-buffered images are images that are recorded after a
triggered event occurs. For example, if you connect a door sensor to
the camera with 20 image post-buffering enabled, 20 images will be
captured/uploaded after the door opened.
Delay
The number of milliseconds to delay between image captures.
For the fastest possible frame rate, set this to 33. Here are some
example frames rates for a single triggered video source:
33 ms = 30 frames per second (Max Speed)
250 ms = 4 fps
1000 ms = 1 fps
Count
The number of post-buffer images to store. There is a finite
amount of memory in which to store images. Keep the total number
of pre and post-buffer medium resolution images to below 50, even
less for full size images.
Page 58
NetCam SC Vandal Resistant Dome
Advertisement
Table of Contents
