Table of Contents
Advertisement
Trigger Overview
By connecting an alarm system, motion detector or other type of
sensor to the back of NetCam SC, it is possible to gather a series of
images when the sensor "triggers" the camera.
TRIGGER
I/O Port
Select with I/O port your trigger source is connected to. NetCam
SC only has I/O port 1.
I/O Level
Select the state of the trigger source's output.
SCHEDULE
NetCam SC can wait in trigger-capture/upload mode 24 hours
a day, seven days a week, or you can set whatever time window and
days of the week you like. Use military time for the beginning and
ending window times.
Example: You can configure the camera to only upload Between
07:30 and 18:30 only on Monday, Tuesday, Wednesday, Thursday
and Friday.
PRE-BUFFER
Pre-buffered images are images that are stored before the event
trigger occurs. For example, if you connect an alarm system to the
camera with 10 image pre-buffering enabled, 10 frames of video that
occurred before the alarm was triggered will be captured/uploaded.
If pre-buffering is enabled, the camera will continuously buffer
images in a rotating loop. This will affect the video speed if you'd
like to view live streams at the same time. Most applications don't
require pre-buffering. Only enable this option if you require video
frames before the trigger takes place.
NetCam SC Vandal Resistant Dome
Page 57
Advertisement
Table of Contents
