Table of Contents
Advertisement
3.11 Miscellaneous
Reboot Camera
Click this to reboot the camera.
Upgrade Firmware
Allows you to select a new firmware and upgrade the camera.
You can also use the StarDot Tools software to upgrade the firmware.
It is recommended that you clear the configuration settings before
upgrading (see config section in the manual).
3.12 Manual Config
Configuration Files
This advanced menu provides access to all of the configuration
files in NetCam SC. We recommend that you do not edit these files
unless you are well versed in Linux and the NetCam SC camera
settings.
3.13 PTZ
The NetCamSC is capable of controlling Pan/Tilt/Zoom
hardware via the RS-232 port. Some PTZ hardware requires an RS-
485 connection. If this is the case, you can use an RS-232 to RS-485
converter.
ENABLED
This option must be enabled in order for PTZ control to occur.
Camera
If this is a multi-input device (i.e. video server), select the
camera.
Type
Select the appropriate PTZ protocol.
Connection
Select the appropriate serial port.
Page 54
NetCam SC Vandal Resistant Dome
Advertisement
Table of Contents
