Table of Contents
Advertisement
3.7
Network Properties
The Network Properties page contains all the IP configuration
information for setting up NetCam SC on a network. After making
changes, click the Apply button to save the settings in the camera.
Ethernet
If your network is Ethernet-based (LAN, cable modem, DSL),
use the NET port on the back of NetCam SC to access the camera. The
first step to network access is assigning NetCam SC an IP address.
There are two ways in which this can be done: automatically (DHCP)
or manually.
Page 46
NetCam SC Vandal Resistant Dome
Advertisement
Table of Contents
