Table of Contents
Advertisement
JPEG Size
Limits the each JPEG frame to a specific size (in KB). This is useful
for limiting bandwidth and increasing frame rate.
EXPOSURE
Auto vs. Manual
Unless you have a controlled (fixed) lighting condition, you will
almost always want to leave Auto Exposure enabled.
Auto Exposure
Enabling Auto Exposure causes NetCam SC to automatically
adjust the image exposure based on the overall brightness of the
image. The following functions are only implemented when Auto
Exposure is enabled.
•
Brightness - The higher the number, the brighter the picture.
This is the target for the auto exposure code.
•
Sync - Fluorescent lighting refreshes at 60 Hz or 50 Hz,
depending on what country you live in. This may interfere with
the camera's exposure. Set the sync to the appropriate value
for your area (example: U.S. is 60 Hz). If you are pointing the
camera outdoors or do not use fluorescent lighting, turn this
option off.
Page 26
NetCam SC Vandal Resistant Dome
Advertisement
Table of Contents
