Adding a New User
To add a user to the Users list, type in the desired username in the
Name field. Type and retype a password in the Password fields. Click the
Add/Modify button. New users will only have viewing rights; only the
admin user can make configuration changes in the camera.
Deleting a User
To remove a user from the Users list, click on the desired username and
click on the Remove button. Note: The default users, admin and viewer,
cannot be removed.
3.11 Advanced Menus
The advanced menu allows you to configure some advanced features
inside the camera such as Triggers and Dynamic DNS support.
3.12 Miscellaneous
Reboot Camera
Click this to reboot the camera.
Upgrade Firmware
Allows you to select a new firmware and upgrade the camera. You
can also use the StarDot Tools software to upgrade the firmware. It is
recommended that you clear the configuration settings before upgrading
(see the manual config section).
3.13 Manual Config
Configuration Files
This advanced menu provides access to all of the configuration files
in NetCam SC. We recommend that you do not edit these files unless you
are well versed in Linux and the NetCam SC camera settings.
3.14 PTZ
For future use.
3.15 Dynamic DNS
If NetCam SC is behind a DSL or cable modem connection and the
public IP address changes, you can use tzo.com as a dynamic DNS service.
This maps your dynamic (i.e. always changing) IP address to a static
hostname of your choice (i.e. yourcompany.stardotcams.com or yourname.
remotecam.com).
NetCam SC
Page 31