Installing A Processor - HP ProLiant DL585 User Manual

Release the latch, and open the cover.
6.

Installing a processor

CAUTION:
should attempt to replace or install the processor in this server.
CAUTION:
multiprocessor configurations must contain processors with the same part number.
CAUTION:
will not function properly.
CAUTION:
processor without using the processor installation tool.
To install a processor:
Locate and download the latest ROM version from the HP website (http://www.hp.com/support).
1.
Follow the instructions on the website to update the system ROM.
Power down the server (on page 27).
2.
WARNING:
processor memory module; when fully populated, it can weigh up to 13.6 kg (30 lb).
Remove the processor memory module, and open the cover ("Removing the processor memory
3.
module" on page 32).
WARNING:
before touching it.
To avoid damage to the processor and system board, only authorized personnel
To prevent possible server malfunction and damage to the equipment,
Processor and PPM sockets 1 and 2 must be populated at all times or the server
To help avoid damage to the processor and system board, do not install the
Use caution when installing the processor memory module or removing the
To reduce the risk of personal injury from hot surfaces, allow the heatsink to cool
Hardware options installation 34