Accessing The Systems Insight Display; Hot-Plug Fans - HP ProLiant DL585 User Manual

IMPORTANT:
page 16), leave the server powered on. The Systems Insight Display LEDs are cleared when
the server is powered off.
Extend the server from the rack ("Extending the server from the rack" on page 27).
1.
If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.
2.
NOTE:
panel ("Rear panel components" on page 11).
Lift up on the hood latch, and remove the access panel.
3.
After installing hardware options, replace the access panel. Be sure that the panel is securely locked
4.
into place before powering up the server.

Accessing the Systems Insight Display

IMPORTANT:
page 16), leave the server powered on. The Systems Insight Display LEDs are cleared when
the server is powered off.
Extend the server from the rack ("Extending the server from the rack" on page 27).
1.
Remove the access panel ("Removing the access panel" on page 28).
2.
Locate the Systems Insight Display ("Media board components" on page 15).
3.

Hot-plug fans

The server supports redundant hot-plug fans ("Fan locations" on page 19) in a 5+1 configuration to
provide proper airflow to the server.
WARNING:
Remove watches, rings, or other metal objects.
•
Use tools with insulated handles.
•
When removing the access panel to view the Systems Insight Display LEDs (on
The T-15 Torx screwdriver is shipped with the server and can be located on the rear
When removing the access panel to view the Systems Insight Display LEDs (on
To prevent personal injury from hazardous energy:
Operations 29