Step 6: Installing A Second Processor - HP NetServer E 800 Installation Manual

Setting Up the HP NetServer E 800

Step 6: Installing a Second Processor

•
Both processors must have the same clock speed and cache size.
•
Use only processor upgrade kits with the same HP product number.
This ensures the product numbers are compatible and the processor type,
clock speed, and cache size are the same.
CAUTION
Do not open the new processor's protective bag or remove it
from the bag until you are ready to install it.
Always wear a wrist-strap and use a static-dissipating work
surface connected to the chassis when handling components.
Ensure the metal of the wrist strap contacts your skin.
Before you remove a processor from the anti-static container,
touch a grounded, unpainted metal surface on the HP
NetServer to discharge static electricity.
NOTE Some processor speeds listed for this HP NetServer may not be
supported. For the latest support information, visit the HP
web site:
14
http:/www.hp.com/go/netserver