Installing The Hdd/Ssd Backplane - Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual

6.5.4

Installing the HDD/SSD backplane

There are two variants of HDD/SSD backplanes available, PCH and SAS
backplanes. While PCH backplanes are used to connect SATA drives, SAS
backplanes can be used to connect to SAS drives.
Figure 23: Labeling of a PCH HDD/SSD backplane
I
Both backplane variants have the same form factor, so note the labeling
(see ovals).
Figure 24: Installing the HDD/SSD backplane
Ê Lift the HDD/SSD backplane over the fixing brackets (1).
Ê Press the HDD/SSD backplane into the slot (see arrows).
BX920 S4
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
115