Removing A Processor - Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual

9.3.3

Removing a processor

I
This description applies to the following procedures:
– Removing CPU 2 from a dual-processor configuration
– Removing CPUs from a defective system board (see section
"Swapping the processor" on page
Ê Remove the desired processor heat sink as described in section
processor heat sinks" on page
Figure 70: Opening socket release lever
Ê Unlatch the socket release lever by pushing it down and away from the
socket (1) , and then swivel it up (2).
BX920 S4
206.
Upgrade and Maintenance Manual
248)
Processors
"Removing
193