Table of Contents
Advertisement
5 Maintenance
Rinsing the machine
Automatic milk system
rinsing
Your Z6 has the following integrated maintenance programmes:
U
Rinsing the machine
U
Rinsing the milk system in the dual spout
U
Cleaning the milk system in the dual spout
system')
U
Changing the filter
U
Cleaning the machine ('Clean')
U
Descaling the machine ('Descale')
E Clean or descale the machine, rinse the milk system or change
the filter when you are prompted to do so.
E In the interests of hygiene, you should clean the milk system
daily when you have been preparing milk.
You can initiate the rinse operation manually at any time.
Precondition: The start screen is displayed.
T Place a receptacle under the dual spout.
T Press the Rotary Switch.
'Maintenance status'
T Press the Rotary Switch again.
'Clean'
T Turn the Rotary Switch until
T Press the Rotary Switch to initiate the rinse operation.
'Machine is
rinsing',
flows out of the dual spout.
The rinse stops automatically. The start screen is displayed.
15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the dual spout
after preparing milk.
('Change the
filter') (only if filter is fitted)
'Rinse'
is displayed.
'Milk system is being
5 Maintenance
('Clean the milk
rinsed', water
33
Advertisement
Table of Contents
