Table of Contents
Advertisement
GRE tunnelling
The Generic Route Encapsulation (GRE) protocol is used in addition to Point-to-Point Tunnelling Protocol (PPTP) to create VPNs
(virtual private networks) between clients and servers or between clients only. Once a PPTP control session establishes the VPN
tunnel GRE is used to securely encapsulate the data or payload.
Configuring GRE tunnelling
To configure GRE tunnelling:
1.
From the menu bar at the top of the screen, click Networking and then from the VPN section on the left side of the screen,
click GRE. The GRE client list is displayed.
2.
Click the +Add button to begin configuring a new GRE tunnelling client profile. The GRE Client Edit screen is displayed.
3.
Click the Enable GRE Tunnel toggle key to switch it to the ON position.
www.netcommwireless.com
Figure 70 - GRE client list
Figure 71 – GRE client edit
NetComm Wireless NTC-30WV 3G Outdoor Router with Voice /
67
Advertisement
Table of Contents
