Table of Contents
Advertisement
Call feature codes
Quick Reference Table
The NTC-30WV supports a number of call feature codes for supplementary services.
FEATURE
Caller ID
Call Waiting
Call Forwarding Unconditional
Call Forwarding No Answer
Call Forwarding Busy
Call Forwarding Unreachable
Caller ID
Caller ID transmits a caller's number to the called party's telephone equipment when the call is being set up but before the call is
answered. Where available, caller ID can also provide a name associated with the calling telephone number.
To force Caller ID to be blocked for an outbound call, dial *31#, and hang up after you hear 2 low pitch beeps.
To force Caller ID to be unblocked for an outbound call, dial #31#, and hang up after you hear 2 high pitch beeps.
To check the status of Call Waiting, dial *#31#.
o
Caller ID is blocked if you hear 2 low pitch beeps.
o
Caller ID is unblocked if you hear 2 high pitch beeps.
Caller ID Test Steps
Dial *31#. Hang up and then out-call a mobile phone. The router phone's number should be blocked;
4.
Dial #31#. Hang up and then out-call a mobile phone. The router phone's number should be shown.
Call Waiting
Call waiting allows for indication and answering of an incoming telephone whilst an existing call is underway.
To disable call waiting, dial #43#, and hang up after you hear 2 high pitch beeps.
To enable call waiting, dial *43#, and hang up after you hear 2 low pitch beeps.
To check the status of Call Waiting, dial *#43# or view the advanced status page of the management console.
o
Call waiting is disabled if you hear 2 high pitch beeps.
o
Call waiting is enabled if you hear 2 low pitch beeps.
Call Forwarding
Call forwarding (or call diverting), is a features that allow an incoming call to be redirected to another number depending on the
circumstances at the time of receiving the call.
Note: Of the four Call forwarding features, the Unconditional feature has the highest priority. Once Call Forwarding
Unconditional is enabled, Call Forwarding No Answer, Call Forwarding Busy and Call Forwarding Unreachable are
disabled.
.
Call Forwarding Unconditional
Call forwarding Unconditional will divert all incoming calls to a phone number that you desire.
To enable Call Forwarding Unconditional, dial *21*<Directory Number>#
(Where directory number is the number you wish to forward calls to)
Hang up after you hear 2 low pitch beeps.
NetComm Wireless NTC-30WV 3G Outdoor Router with Voice
126
ACTIVATION
#31#
(to unblock caller ID for
outgoing calls)
*43#
*21*<Directory Number>#
*61*<Directory Number>#
*24*<Directory Number>#
*62*<Directory Number>#
Table 35 - Additional Product Information - Call Feature Codes Quick Reference
DEACTIVATION
*31#
(to block caller ID for outgoing
calls)
#43#
#21#
#61#
#24#
#62#
STATUS
*#31#
*#43#
*#21#
*#61#
*#24#
*#62#
www.netcommwireless.com
Advertisement
Table of Contents
