Native Instruments Maschine Reference Manual page 202

The Slice Tab on MASCHINE software
1 Mode and Slices Settings
m
odE
S
lICES
Here you can select either Split, Grid or Detect. In Split
mode, the Sample will be sliced into equally spread Slices.
In Grid Mode the Sample will be sliced according to musi-
cal values. In Detect mode, the Sample will be sliced ac-
cording to its transients.
Depending on the Mode selection you have made, you can
adjust the following here:
In Split mode: Choose the amount of Slices: 4, 8, 16 or
32.
In Grid mode: Choose the musical value : 4th, 8th,16th or
32th notes.
In Detect mode: Adjust the Sensitivity of the transient de-
tection here. Higher values will cause more Slices to be
detected because more transients will be recognized, lower
values will result in less slices. This parameter should be
adjusted until all the musically significant slices are being
detected in the waveform.
MASCHINE 1.5 Reference Manual – 202