Native Instruments Maschine Reference Manual page 159

The above method loads the initialized FX algorithm. If you want to load an FX Preset instead,
press BROWSE (without pressing SHIFT). You will now be presented with a list of the avail-
able FX Presets; you can browse them in the usual manner by turning Knob 5 and load one
by pressing Button 8, or load them directly by using Buttons 5 and 6. If you don't see any
FX presets after pressing BROWSE, turn Knob 1 to change the tag filter to FX.
%
Some of the Effects will have more than one parameter page; in this case, use the Page
Buttons to navigate between them.
%
You can also choose to select an FX module (FX1 or FX2) after pressing BROWSE by
using the Page buttons. This is useful if you forget to select an FX module before enter-
ing Browse mode.
Software
1. Click on the Sound Tab to select the Sound you want to apply Effects to. The actual Sound
that you assign the FX to is always the one currently in focus; in the example below it's
the Clap 909 Sound.
The Sound Tab with the Clap 909 Sound in focus
2. Select one of the two FX Modules and click the Arrow to the right to get a list of all avail-
able FX:
MASCHINE 1.5 Reference Manual – 159