Native Instruments Maschine Reference Manual page 161

Pressing Button 6 on the Right Display
2. To select an Effect for the FX Module, press SHIFT followed by BROWSE. The Right
Display now shows the list of the available Effects. You can browse through them by either
turning Knob 5, or load them directly by using Buttons 5 and 6. When you've found an
Effect you want to apply, press Button 8 to load it into the FX Module.
The Right Display showing the Load option
►
If you want to load an FX Preset, press BROWSE without SHIFT. You will now be pre-
sented with a list of the available FX Presets; you can browse them by turning Knob 5
and load one by pressing Button 8, or load them directly by using Buttons 5 and 6. If
you don't see any FX presets after pressing BROWSE, turn Knob 1 to change the tag
filter to FX.
Software
1. In the same way that FX get applied to the Sound currently in focus, they get applied to
the Group currently in focus, so make sure to have your Group in focus in the Arranger
by clicking on it:
MASCHINE 1.5 Reference Manual – 161