Resochord - Native Instruments Maschine Reference Manual

8.5.4 Resochord

The Resochord on the software
The Resochord is a bank of 6 comb filters, each of which is individually tuned according to
the selected chord. The results are most effective with non-melodic content (like drums) as
the Resochord will print its own harmonic content on to any input material.
Pitch
m
odE
S
prEad
S
tylE
C
hord
t
ranSpoSE
Color
B
rIGhtnESS
F
EEdBaCk
d
ECay
m
Ix
Here you can select between the two modes of the
Resochord: C and S
hord trInG
are tuned according to various chords. In String mode, the 6
combs are centered around 1 frequency and can be spread
for an intense chorus-like effect. Depending on your selec-
tion the other parameters in the Pitch area will change.
S is only available if S
prEad trInG modE
define how big the difference in tuning between the combs is.
S is only available if C
tylE
lect between different chord-styles such as minor or major.
C is only available if C
hord hord modE
choose from different chords to be applied to your audio signal.
t is only available if C
ranSpoSE
lows you to transpose the Resochord in semitones.
This is to determine the basic sound characteristic of the
Resochord: higher values will brighten the sound by adding
high frequencies.
Adjust the amount of the Feedback here.
With Decay you adjust how fast the Resochord fades out.
Mix lets you adjust the amount of the effect in relation to
the dry original audio signal.
. In Chord mode, the 6 combs
is selected. It allows you to
is selected. You can se-
hord modE
is selected. Here you can
is selected. It al-
hord modE
MASCHINE 1.5 Reference Manual – 154