Native Instruments Maschine Reference Manual page 139

Type
m
odE
Freq
C
Ut
r
ES
Modulation
a
moUnt
S
oUrCE
E d
nvElopE ECay
S
mooth
S
hapE
l S S
Fo ynC pEEd
S
hapE
p
haSE
l S
Fo pEEd
S
hapE
Here you can select between four different filter-types:
n , hp (highpass), Bp (bandpass), and lp (lowpass).
otCh
Depending on the filter type, the following parameters vary
as indicated.
C stands for Cutoff Frequency and is available with all
Ut
filter-types.
Res controls the amount of Resonance - the amount of am-
plification around the cutoff frequency. It is not available
with filter-type Notch.
This defines how much the Filter gets modulated by the
modulation source.
Here you can select between three different modulation
sources: E , lFo S
nvElopE
choice for the modulation source, the following parameters
appear to the right:
With Decay you adjust how fast the envelope fades out.
Smooths the shape of the
Change the Shape of the envelope here.
Defines the speed of the modulation in musical values
from 16/1 (once every 16 bars) up to 1/32 note.
Change the shape of the LFO waveform here.
Adjusts the start phase of the LFO.
Defines the speed of the modulation in Hz (Hertz) ranging
from 0.03 Hz up to 16 Hz.
Change the shape of the LFO waveform here.
and lFo. Depending on your
ynC
.
EnvElopE
MASCHINE 1.5 Reference Manual – 139