8.2.2 EQ
The EQ on the hardware
Use the EQ to boost or cut selective frequencies of the audio signal. The EQ is mainly a tool
to tailor your audio signal to taste by cutting out selected frequencies or boosting others, but
can also be used quite efficiently as a DJ-style cut-and-boost effect. Note that the parameters
cover two pages.
Page 1
Low Band
F
rEQ
G
aIn
Mid Band 1
F
rEQ
G
aIn
Mid Band 2
F
rEQ
G
aIn
High Band
F
rEQ
G
aIn
Frequency selector for the Low Band. Ranges from 20 Hz
to 8 kHz.
Gain Control for the Low Band.
Frequency selector for the Mid Band 1. Ranges from 40 Hz
to 16 kHz.
Gain Control for the Mid Band 1.
Frequency selector for the Mid Band 2. Ranges from 40
Hz to 16 kHz.
Gain Control for the Mid Band 2.
Frequency selector for the High Band. Ranges from 50 Hz
to 20 kHz.
Gain Control for the High Band.
MASCHINE 1.5 Reference Manual – 140