Confirming Transmissions; Automatic Redialing - Dell 2355dn User Manual

Press the left/right arrows to select On Hook Dial.
3
If necessary, adjust the document contrast and resolution to suit your fax needs. See
4
"Adjusting the Document Contrast" or "Adjusting the Document Resolution"
Press On Hook (
5
Enter the remote fax machine's fax number using the keypad.
6
Press Start ( . (on the touch screen or the operator panel)
7 )
NOTE:
Press to cancel the fax job at any time while sending the fax.

Confirming Transmissions

When the last page of your document has been sent successfully, the printer beeps and returns to
Standby mode.
If something goes wrong while sending your fax, an error message appears on the display. For a
listing of error messages and their meanings, see "Clearing LCD Error Messages".
If you receive an error message, press
You can set your printer to print a confirmation report automatically after each fax transmission.
For further details, see the MSG Confirm item in "Available Fax Defaults Options".

Automatic Redialing

When the number you have dialed is busy or there is no answer when you send a fax, the machine
automatically redials the number. The redial time depends on the country's factory default setting.
To change the time interval between redials and the number of redial attempts, see "Available Fax
Defaults Options".
).
to clear the message and try to send the document again.
207