Dell 2355dn User Manual page 177

Setting up an e-mail account
To scan and send an image as an email attachment, you need to set up network parameters using
Embedded Web Service.
Enter your machine's IP address as the URL in a browser and click Go to access the web site
1
of your machine.
Click Email Settings
2
Enter the server port number, from 1 to 65535.
3
The default port number is 25.
Put a check mark in SMTP Requires Authentication to require authentication.
4
Enter your SMTP Server Login Name, SMTP Server Password, SMTP Server
5
Connection Timeout, and Maximun Message Size.
Click Submit.
6
Setting up an SMB server
To scan and send an image as an email attachment, you need to set up network parameters using
Embedded Web Service.
Enter your machine's IP address as the URL in a browser and click Go to access the web site
1
of your machine.
Click Scan to Server Settings
2
Click Add.
3
Select the index number, from 1 to 20.
4
Enter a name in Alias for the Setup for the corresponding Server List entry. This name will
5
be displayed on your machine.
Select IP Address or Host Name.
6
Enter the server address in dotted decimal notation or a host name.
7
Enter the server port number, from 1 to 65535.
8
The default port number is 139.
Enter the Share name of the server.
9
Check the box next to Anonymous if you want to permit unauthorized persons to access the
10
SMB server. This box is unchecked by default.
Enter the login name and password.
11
Enter the domain name of the SMB server.
12
Enter the Scan File Folder under shared folder for storing the scanned image.
13
176
SMTP Server Setup.
SMB Settings Sever List.