Clearing Lcd Error Messages - Dell 2355dn User Manual

Laser mfp
Hide thumbs Also See for 2355dn:
Table of Contents

Advertisement

Clearing LCD Error Messages

NOTE:
You may see an exclamation mark (
in that case, press the cross mark to browse detailed message.
NOTE:
[xxx] indicates the media type.
NOTE:
[yyy] indicates the tray.
NOTE:
[zzz] indicates the paper size.
NOTE:
Some error messages are provided with graphical images on the LCD of the operator
panel.
NOTE:
If the message is not in the table, cycle the power and try the printing job again. If the
problem persists, call for service.
NOTE:
When you call for service, provide display message to service representative. You can get
help easily.
NOTE:
Some messages may not appear in the display depending on options.
Display message
Fax line not connected
DADF Door Open
DADF Exit Door Open
Device is not supported
DADF paper jam at
entry
DADF paper jam at exit
DADF paper jam in
duplex path
DADF Rev. Jam
) or a cross mark (
Meaning
Your printer cannot connect with a remote
printer or has lost contact because of a problem
with the phone line.
OR
No dial tone sounds
The DADF door is not securely latched.
A non-USB device is connected with USB
memory port.
The loaded document has jammed in the
DADF.
) on the upper of the display,
Suggested solutions
• Try again. If the problem persists, please wait
for an hour or try a different phone line if
possible and then try to connect again.
• Turn the ECM mode on. See "ECM Mode".
• Check that the phone line is connected
properly. See "Connecting the Telephone
Line".
• Check that the phone socket in the wall is
used by plugging in another phone.
Close the cover.
Remove the non-USB device from USB
memory port.
Clear the document jam. See "Clearing Jams in
the DADF".
297

Advertisement

Table of Contents
loading

Table of Contents