Scanner Lamp Power Save Mode; Changing The Default Mode; Setting The Time Out Option - Dell 2355dn User Manual

Scanner Lamp Power Save Mode

The scan lamp under the document glass automatically turns off when it is not in actual use after a
preset period to reduce power consumption and extend the lamp life. The lamp automatically
turns on and the warm-up cycle begins whenever any key is pressed or the DADF cover is opened
or a document is detected in the DADF.
You can set the duration for which the scan lamp waits after a scan job is completed before it
switches to the Power Save mode.
Press Setup Machine Setup from the home screen.
1
Press the Next (
2
Press the up/down arrows to select Initial Setup.
3
Press the up/down arrows to select Scan Power Save.
4
Press the left/right arrows to select the timeout value you want.
5
Press the home icon (
6

Changing the Default Mode

You can set the default values for copy, fax, scan, and home window.
Press Setup Machine Setup from the home screen.
1
Press the Next (
2
Press the up/down arrows to select Initial Setup.
3
Press the up/down arrows to select Default Mode.
4
Press the left/right arrows to the function you want to change, and change its settings.
5
Press the home icon (
6

Setting the Time Out Option

You can set the time the printer waits before it restores the default copy or fax settings if you do
not start copying or faxing after changing the settings on the operator panel.
Press Setup Machine Setup from the home screen.
1
Press the Next (
1
Press the up/down arrows to select Initial Setup.
2
Press the up/down arrows to select Timeout.
3
Press the left/right arrows to select the timeout value you want.
4
Press the home icon (
5
) button.
) to return to the Standby mode.
) button.
) to return to the Standby mode.
) button.
) to return to the Standby mode.
47