Collate Copying; Auto Fit Copying - Dell 2355dn User Manual

If necessary, customize the copy settings including number of copies, contrast, original size,
6
and original type. See "Setting Copy Options".
Press
7
Press Start (
8

Collate Copying

This special copy mode can be applied when you load a document using only the DADF.
To make the Collate copying:
Load the document(s) face up with top edge in first into the DADF.
1
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document".
Press Copy from the home screen.
2
Press the left/right arrows to select Collate Copy.
3
If necessary, customize the copy settings including number of copies, contrast, original type,
4
and original size by pressing Options. See "Setting Copy Options".
Press
5
Press Start (
6

Auto Fit Copying

This special copy mode can be applied when you load a document using only the document glass.
A
If a document is detected in the DADF, the Auto Fit does not work.
.
To make the Auto Fit copying:
Place a single document face down on the document glass.
1
For details about loading a document, see "Loading an Original Document".
Press Copy from the home screen.
2
Press the left/right arrows to select Auto Fit Copy.
3
If necessary, customize the copy settings including number of copies, contrast, original type,
4
and original size by pressing Options. See "Setting Copy Options".
148
to go to the upper menu.
. (on the touch screen or the operator panel)
)
NOTE:
You can cancel the copy job at any time. Press
to go to the upper menu.
. (on the touch screen or the operator panel)
)
NOTE:
You can cancel the copy job at any time. Press
NOTE:
You cannot adjust the copy size using the Zoom menu while the Auto Fit copying is
enabled.
, and the copying will stop.
, and the copying will stop.