Send All Calls - Avaya 2420 User Manual

To leave a message without ringing an extension
1. Press the
LWC
(while off-hook).
2. When you hear dial tone, dial the extension and listen for the
confirmation tone.
Message lamp goes on at the called telephone (if so equipped).
3. Hang up.
To cancel a Leave Word Calling message
Note: You cannot cancel a message left for an AUDIX subscriber.
1. Press the
Cancel LWC
or Dial the Leave Word Calling cancel code (while off-hook).
2. When you hear dial tone, dial the extension and listen for confirmation
tone.
Note: If you hear reorder tone, the message is not canceled; try again.

Send All Calls

The Send All Calls feature temporarily sends all your calls to your voice mail
system or to another extension in the same system. Note that priority calls
and automatic callbacks are not redirected by the Send All Calls feature.
Note: Before you can use this feature, your system manager must provide a
coverage path for your extension.
To send all calls (except priority calls) and automatic callbacks
immediately to coverage
1. Press the
Send Calls
access code (while off-hook)
2. Listen for confirmation tone.
Note: You hear confirmation tone only when you use a feature access
code.
To cancel Send All Calls
1. Press the
Send Calls
Calls cancel code (while off-hook).
2. Listen for confirmation tone.
button or Dial the Leave Word Calling access code
button (while on-hook or off-hook)
button (while on-hook) or Dial the Send All Calls
button again (while on-hook) or Dial the Send All
43