Send All Calls - Avaya 8410B Manual

Guide Builder Document
Note: If you receive a call, go off-hook, or lose power during selection, the process is interrupted and you must start again.
To send all calls (except priority calls) to coverage:
1. Press Send Calls while on-hook.
or, Dial the Send All Calls code *30 while on-hook.
Note: You may hear a ring-ping tone from your telephone as each call is forwarded.
To cancel Send All Calls:
1. Press Send Calls again while on-hook.
or, Dial the Send All Calls Cancel code #30 while on-hook.
Note: Your telephone is set for either the Speaker (listen-only) or the Speakerphone (listen and speak) function. Check with your system manager to see which of these two
features you can use.
Use the following procedures if your telephone is set for the Speaker (listen-only) feature.
To answer or place a listen-only call:
Note: In order for the other person to hear you, you must speak through the handset.
1. Press Speaker.
The red light next to Speaker goes on.
The red light next to Mute goes on.
2. Place a call, or access the selected feature.
3. Adjust the speaker volume if necessary.
To raise the volume, press the right half of the Speaker Volume control button. To lower the volume, press the
file://C:\Program Files\gbuilder32\win\~5334240.htm

Send All Calls

Speaker
Page 20 of 31
{confirmation tone}
{confirmation tone}
7/24/2005