Installing A Memory Module - IBM System x3620 M3 7376 Installation And User Manual

10. Push the latch to the closed (locked) position.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 78.

Installing a memory module

The following notes describe the types of dual inline memory modules (DIMMs) that
the server supports and other information that you must consider when you install
DIMMs:
60
System x3620 M3 Type 7376: Installation and User's Guide
5. Prepare the drive according to the instructions that come with the drive, setting
any switches or jumpers.
6. Remove the server cover (see "Removing the cover" on page 37).
7. Remove the filler panel from the tape-drive bay (if one is installed).
8. Connect the cables to the back of the tape drive.
9. Make sure all the cables are out of the way; then, slide the tape-drive
assembly the rest of the way into the tape-drive bay.