IBM System x3620 M3 7376 Installation And User Manual page 66

To install a virtual media key, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Remove the cover (see "Removing the cover" on page 37).
4. Remove the PCI riser-card assembly (see "Removing the PCI riser-card
5. Align the mounting bracket on the rear of the virtual media key with the
6. Press the virtual media key down into the connector until it is firmly seated on
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 78.
50
System x3620 M3 Type 7376: Installation and User's Guide
on page 28.
external cables (see "Turning off the server" on page 18).
assembly" on page 39).
mounting tab and slide it down the tab onto the virtual medial key connector on
the system board.
the system board.