Removing The Air Baffle - IBM System x3620 M3 7376 Installation And User Manual

Removing the air baffle

When you work with some optional devices, you must first remove the air baffle to
access some components or connectors on the system board. The following
illustration shows how to remove the air baffle.
To remove the air baffle, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Remove the cover (see "Removing the cover" on page 37).
4. Grasp the top of the air baffle and lift it out of the server.
38
System x3620 M3 Type 7376: Installation and User's Guide
on page 28.
external cables (see "Turning off the server" on page 18).
Attention: For proper cooling and airflow, replace the air baffle before you
turn on the server. Operating the server with the air baffle removed might
damage server components.