b. If you are installing an adapter in expansion slot 2, rotate the adapter
retention latch to the open position.
c. Align the adapter with the connector on the riser card.
d. Press the adapter firmly into the connector on the riser card.
7. Connect any required cables to the adapter.
Attention:
v When you route cables, do not block any connectors or the ventilated space
around any of the fans.
v Make sure that cables are not routed on top of components that are under
the PCI riser-card assembly.
v Make sure that cables are not pinched by the server components.
8. Rotate the adapter retention latch to secure the adapter on the PCI riser-card
assembly.
9. Install the PCI riser-card assembly (see "Installing the PCI riser-card assembly"
on page 78).
10. Perform any configuration tasks that are required for the adapter.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 78.
Chapter 2. Installing optional devices
41