46
System x3620 M3 Type 7376: Installation and User's Guide
c. Press the posts into the rings and underneath the tabs on the remote
battery tray. Make sure the two retention clips secure the battery and
battery carrier on the remote battery tray.
8. Align the two pins on the remote battery tray with the holes on the PCI
riser-card assembly and press the retention latch into the slot to secure the
remote battery tray on the PCI riser-card assembly.
9. Route the remote battery cable through the cage hole on the PCI riser-card
assembly.
Attention:
Make sure that the cable is not pinched and does not cover any
connectors or obstruct any components on the system board.