Product Hardware Features - TRENDnet TEG-448WS User Manual

TRENDnet User's Guide

Product Hardware Features

Rear View
• AC Power Connector – Connect the AC power cord to the connector and the
other side into a power outlet. (Input: 100~240VAC, 50/60Hz)
© Copyright 2013 TRENDnet. All Rights Reserved.
Front View
Reset
Button
AC Power Connector
Diagnostic LEDs
Power
Gigabit Ports
LED
(Link/Activity LEDs per port)
• Reset Button – Press and hold this button for 10 seconds and release to
reset the switch to factory defaults.
•
Gigabit Ethernet Ports (1-48) – Connect network devices. Ports 45-48
are shared with SFP slots 45F-48F and disabled when SFP slots (45F-48F)
are in use and can be used for uplink or downlink connections.
• SFP slots (45F-48F) – Supports optional 1000BASE-SX/LX mini-GBIC
modules.
• Power LED
: When the Power LED lights on, the device is receiving
On
power.
: When the Power turns off or the power cord is not
Off
connected
TEG-448WS
Gigabit Ports w/
shared SFP Slots
2