Product Hardware Features - TRENDnet TPE-TG50ES User Manual

TRENDnet User's Guide

Product Hardware Features

Reset Button
Gigabit Port

Reset Button – Press and hold the button 1~5 seconds and release to
reboot the device. Pressing the button more than 6 seconds will reset
the switch to factory defaults. The ports LEDs will display Amber and
then turn off to indicate that the reset was initiated.

Gigabit Ethernet PoE+ Ports (1-4) – Connect either PoE+ or non-PoE
devices.

Gigabit Ethernet Port (5) – Connect a non-PoE device.
© Copyright 2018 TRENDnet. All Rights Reserved.
Front View
LED Indicators
Rear View
PoE+ Gigabit Ports Power Port
Diagnostic LEDs

Power LED
On When the Power LED is on, the device is receiving power.
When the Power LED is off, the power adapter is not
Off
connected or the device is not receiving power.

PoE MAX (Power over Ethernet Max.)
When reaching near the max PoE power budget provided
64W or above, the LED will turn on and the system will not
On
provide power additional PD (PoE client devices) after max
PoE budget is reached.
When the PoE power provided is below the 57W PoE
Off
power budget.
TPE-TG50ES
2