TRENDnet TEG-448WS User Manual page 58

TRENDnet User's Guide
Replaced-CoS: Enter a number in the Replaced-CoS field ranging from
o
0 to 7. This field indicates the CoS level of interest. This field is not
mandatory and you may elect to leave it blank
Replaced-DSCP: Enter a number in the Replaced-DSCP field within the
o
range of 0 to 63. This field indicates the DSCP level of interest. This
field is not mandatory and you may elect to leave it blank.
Rate Control Index: The Rate Control Index is a unique number within
o
the range of 1 - 65535. This field is mandatory and must match the
Rate Control Settings page.
Port List: Select the interface for which you want to display data.
o
• Click Add to add the policy to the Policy Table.
© Copyright 2013 TRENDnet. All Rights Reserved.
In the list, you can click Modify to modify an entry or click Delete or delete the entry.
You can also click Delete All to delete all of the entries in the table. If the entries span
multiple pages, you can navigate page number in the Page field and click Go or you can
click First, Previous, Next, and Last Page to navigate the pages.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
TEG-448WS
54