System; Set Your System Information - TRENDnet TEG-448WS User Manual

TRENDnet User's Guide

System

Set your system information

System > System Management
This section explains how to assign a name, location, and contact information for the
switch. This information helps in identifying each specific switch among other switches
in the same local area network. Entering this information is optional.
1. Log into your switch management page (see
on page 7).
2. Click on System, and click on Settings.
3. Review the settings. When you have completed making changes, click Apply to save
the settings.
• System Description - Specifies the Switch model. You cannot change this
parameter.
• System Object ID - Indicates the unique SNMP MIB object identifier that
identifies the switch model. You cannot change this parameter.
•
System Name - Specifies a name for the switch, the name is optional and may
contain up to 15 characters.
•
System Location - Specifies the location of the switch. The location is optional
and may contain up to 30 characters.
• System Contact - Specifies the name of the network administrator responsible
for managing the switch. This contact name is optional and may contain up to
30 characters.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your switch management page"
4. Click Apply.
5. Click Save Settings to Flash (menu).
6. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that the
changes are permanent. If you do not complete this step, rebooting or power cycling the
switch will lose all of your current configuration changes.
TEG-448WS
9