View Your Spanning Tree Protocol Instance Information (Mstp); Configure Spanning Tree Protocol Mst Port Settings (Mstp) - TRENDnet TEG-448WS User Manual

TRENDnet User's Guide

View your Spanning Tree Protocol Instance Information (MSTP)

Bridge > Spanning Tree > MST Settings
1. Log into your switch management page (see
on page 7).
2. Click on Bridge, click on Spanning Tree, and click on Instance Information.
3. View your MSTP instance information.
• MSTI ID – Specifies the instance to which the VLAN is assigned.
• Internal Root Cost
•
Root Port – Indicates the selected instance's root port.
• Regional Root Bridge
• Designated Bridge – Displays the ID of the bridge that connects the link or
shared LAN to the root.
•
Instance Priority – Specifies the selected spanning tree instance device priority.
The field range is 0-61440. The field default is 32768.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your switch management page"

Configure Spanning Tree Protocol MST Port Settings (MSTP)

Bridge > Spanning Tree > MST Settings
1. Log into your switch management page (see
on page 7).
2. Click on Bridge, click on Spanning Tree, and click on MST Port Settings.
3. Review the settings. For each entry, click Apply to save changes.
•
Select MST Port – Click the drop-down to select which MST port to configure.
•
MST Port Info - The MST Port Information page provides user to configure the
MSTP Interface settings.
Admin Path Cost (0 = Auto) - This is the port cost used by MSTP when
o
calculating path cost to the root bridge.
Priority - This is the port priority used by MSTP in calculating path
o
costs when two ports on the switch have the same port cost.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
TEG-448WS
"Access your switch management page"
25