Table of Contents
Advertisement
problem
Tool will not start
1.
2.
3.
Tool operates
1.
slowly or
erratically.
2.
Tool does not
1.
grind, sand or
brush effectively.
2.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
SKU 65519
troubleshooting
possible causes
No power at outlet.
Cord not connected.
Carbon Brushes may be worn or
damaged.
Carbon Brushes may be worn or
damaged.
Excess pressure applied to
workpiece.
Disc accessory may be loose on
Spindle. Check tightness of Outer
Flange Arbor Nut or threaded disc
accessory on Spindle.
Disc accessory may be damaged,
worn or wrong type for the
material.
For technical questions, please call 1-800-444-3353.
likely Solutions
1.
Check power at outlet.
2.
Check that cord is plugged in.
3.
Have Carbon Brushes replaced by a
qualified technician.
1.
Have Carbon Brushes replaced by a
qualified technician.
2.
Decrease pressure, allow tool to do
the work.
1.
Be sure disc accessory is of correct
dimension and Outer Flange Arbor Nut
is tight.
2.
Check condition and type of disc
accessory. Use only proper type of
disc accessory in good condition.
Page 15
Hide quick links:
Advertisement
Table of Contents
