Flowconf Configuration - Pv4 - Honeywell SMV 3000 User Manual

6.9

FlowConf Configuration - PV4

Engineering Units
PV4 Engineering Units
Table 16
d Factory setting.
* The SCT 3000 will not display SCFM, SCFH, ACFM or ACFH. However you can
68
The FlowConf tab card displays the Low Range Value (LRV), Low Range
Limit (LRL), Upper Range Value (URV) and Upper Range Limit (URL) for
PV4 in the unit of measure selected in the Engineering Units field.
Select one of the preprogrammed engineering units for display of the PV4
measurements, depending upon type of flow measurement configuration.
Table 16 lists the pre-programmed engineering units for volumetric flow
and Table 17 lists the engineering units for mass flow.
Pre-programmed Volumetric Flow Engineering Units for PV4
Engineering Unit
/h d
3
M
gal/h
l/h
cc/h
3
m /min
gal/min
l/min
cc/min
3
m /day
gal/day
Kgal/day
bbl/day
3
m /sec
CFM *
CFH *
configure the SMV 3000 to calculate and display the volumetric flowrate at standard
conditions (CFM or CFH) by choosing standard volume in the Flow Compensation
Wizard. Likewise, you can choose actual volume for applications when you want to
calculate volumetric flowrate at actual conditions.
SMV 3000 Transmitter User's Manual
Meaning
Cubic Meters per Hour
Gallons per Hour
Liters per Hour
Cubic Centimeters per Hour
Cubic Meters per Minute
Gallons per Minute
Liters per Minute
Cubic Centimeters per Minute
Cubic Meters per Day
Gallons per Day
Kilogallons per Day
Barrels per Day
Cubic Meters per Second
Cubic Feet per Minute
Cubic Feet per Hour
Continued on next page
1/99