Honeywell SMV 3000 User Manual page 184

Appendix B– Configuration Record Sheet,
1b. Static Pressure - PV2 - Configuration Section
PV2 Damping (sec.):
PV2 Eng. Units:
(Static Pressure)
PV2 Range:
(default depends on SMV 3000 model number - specify gauge or absolute)
Barometric Pressure:
(If using SMV 3000 in a flow application and you specify the SMG170 model number, enter the barometric pressure)
(Default is 14.7 psia)
1c. Process Temperature - PV3 - Configuration Section
PV3 Damping (sec.):
PV3 Probe Type:
PV3 Eng. Units:
PV3 Range:
(defaults are -200 and 450 deg. C)
PV3 Cold Junc. Comp.:
(Only for Themocouple. If external, specify the temp. in the ECJT slot)
PV3 TC Fault Detection:
PV3 Output Charact.:
172
0.0 ___ 0.16 ___ 0.32 ___
4 ___ 8 ___ 16 ___
"H2O_39F ___ PSI ___
kg/cm^2 ___ mmH2O_4C ___
mbar ___ g/cm^2 ___
mH2O_4C ___ "H2O_68F ___
LRV _____ URV _____
___________
0.0 ___ 0.3 ___ 0.7 ___
12.7 ___ 25.5 ___ 51.1 ___
PT 100 D RTD ___ Type E TC ___
Type K TC ___ Type T TC ___
deg. C ___ deg. F ___
LRV _____ URV _____
Internal ___ External ___
On ___ Off ___
Linear ___ Non-Linear ___
SMV 3000 Transmitter User's Manual
Continued
0.48 ___ 1 ___ 2 ___
32 ___
MPa ___
mmHg_0C ___
inHg_32F ___
"H2O_60F ___
1.5 ___ 3.1 ___ 6.3 ___
102.3 ___
Type J TC ___
deg. R ___
ECJT: _____
bar ___
KPa ___
ATM ___
Continued on next page
1/99