Dpconf Configuration - Pv1 - Honeywell SMV 3000 User Manual

6.6

DPConf Configuration - PV1

Engineering Units
PV1 Engineering Units
Table 12
d Factory setting.
54
The DPConf tab card displays the Low Range Value (LRV), Low Range
Limit (LRL), Upper Range Value (URV) and Upper Range Limit (URL)
for PV1 in the unit of measure selected in the Engineering Units field.
Select one of the preprogrammed engineering units in Table 12 for display
of the PV1 measurements.
Pre-programmed Engineering Units for PV1
Engineering Unit
inH2O @ 39F d
inH2O @ 68F
mmHg @ 0C
psi
kPa
MPa
mbar
bar
2
g/cm
2
Kg/cm
inHg @ 32F
mmH2O @ 4C
mH2O @ 4C
ATM
inH2O @ 60F
SMV 3000 Transmitter User's Manual
Meaning
Inches of Water at 39.2 F (4 C)
Inches of Water at 68 F (20 C)
Millimeters of Mercury at 0 C (32 F)
Pounds per Square Inch
Kilopascals
Megapascals
Millibar
Bar
Grams per Square Centimeter
Kilograms per Square Centimeter
Inches of Mercury at 32 F (0 C)
Millimeters of Water at 4 C (39.2 F)
Meters of Water at 4 C (39.2 F)
Normal Atmospheres
Inches of Water at 60 F (15.6 C)
Continued on next page
1/99