Sensor Lights; Chime; Special Chime - GE Simon XT User Manual

Sensor lights

The system automatically turns certain lights on or off when certain sensors are tripped. For example, you can
set a basement light to turn on when the door to the basement is opened. You can associate sensors with lights
in menu item System programming > Light control >Sensor light. See
To enable or disable sensor-activated lights, do the following:
1. Scroll up/down until the display shows Sensor lights and press Enter.
2. The current setting will flash. Scroll up/down to toggle this option on/off and press Enter.
3. The setting will stop flashing. Press Status to exit.
A light-bulb icon will appear in the display when sensor lights are enabled.
Note: This menu option will not appear if no sensor lights have been defined.

Chime

To enable or disable the chime feature, do the following:
1. Scroll up/down until the display shows Chime and press Enter.
2. The current setting will flash. Scroll up/down to this option on/off and press Enter.
3. The setting will stop flashing. Press Status to exit.
A solid bell icon will appear in the display when chime is enabled.
Note: This menu option will not appear if no chime sensors are in your system

Special chime

To enable or disable the special chime feature, do the following:
1. Scroll up/down until the display shows Chime and press Enter.
2. The current setting will flash. Scroll up/down to toggle this option on/off and press Enter.
3. The setting will stop flashing. Press Status to exit.
An outlined bell icon will appear in the display when special chime is enabled.
Note: This menu will not appear if special chime sensors are not in your system.
Light control (optional)
Chapter 4 27
Programming
on page 14.